DashSync

Answer

For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm centre to centre (from one screw hole to another) (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.

Moreover, are drawer pulls a standard size?

For standard-sized cabinets, 3- or 4-inch and 96- or 128-millimeter pulls are most common. Typical sizes for knobs are 1 1/4- or 1 3/8-inch. Larger cabinets generally require larger pulls: 6 to 12 inches cc. The width of a drawer matters.

Furthermore, can you use different size pulls on cabinets?

To avoid this issue, make sure when mixing multiple styles that they’re noticeably different in scale. The kitchen shown here has medium-size handles for most lowers (likely 3-inch hole spacing), small (around 1-inch) latch pulls for the upper cabinets and much larger handles for the panelled appliances.

Likewise, how do you determine Cabinet Handle length?

Most importantly, when choosing cabinet hardware pulls you MUST look at the overall length.

Understanding Cabinet Hardware Pull Lengths

Center-to-Center– the distance from the CENTER of one screw hole to the CENTER of the other screw hole.

Overall Length– the distance from one end of the pull to the other end.

How do I choose cabinet pulls?

To help you on your search for the perfect hardware for your kitchen cabinets, here are some tips to follow.

Stick with the theme.

Keep finishes cohesive.

Know when to use knobs over pulls.

Consider the colour of your kitchen cabinets.

Be aware of the appliances and fixtures in the kitchen.

Don’t overlook quality.

33 Related Question Answers Found

Where should drawer pulls be placed?

Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) centre the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centred at the very top of the drawer panel, where the drawer rail begins.

Where do you put drawer pulls?

Install Hardware Higher on the Lowest Drawer Most drawer pulls are centred on the drawer fronts, but if the cabinet you’re working on has two or three drawers the same size and one larger one at the bottom, install the bottom knob (or pull) higher than the centre of that drawer front.

Are all drawer pulls the same size?

For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm centre to centre (from one screw hole to another) (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.

How wide should drawer pulls be?

If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly) (roughly). Single pulls or knobs on drawers should be laterally centred and slightly higher than vertical centre.

Can you use cup pulls on cabinet doors?

Cup Pulls. Used most commonly in traditional and transitional style kitchens, cup pulls are an excellent way to add an extra pop of personality to cabinetry. Because of the size and configuration of cup pulls they are typically only installed on drawer doors.

Should I use knobs or pulls on kitchen cabinets?

There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.

What is an appliance pull?

Appliance Pulls. Appliance pulls are long kitchen cabinet handles generally used in two places in the kitchen. The first is on wood panel covered appliances, usually refrigerators or dishwashers. The other popular use for appliance pulls is for tall pantry doors or oversized storage drawers.

What hardware looks best on Shaker cabinets?

Top Hardware Styles To Pair With Your Shaker Cabinets Classic – Ceramic Knobs. Ceramic knobs bring such charm to your kitchen. Elegant – Glass Knobs. Add elements of grace and style with glass or crystal knobs. SIMPLE- brass/nickel knobs. MODERN – tubular bar pulls. Sleek – Flat Bar Pulls. VINTAGE- bin pulls. RETRO – latches. INDUSTRIAL – pulls with exposed screws.

Where do you put handles on kitchen cabinets?

Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.

ncG1vNJzZmivp6x7r6%2FEq6upp5mjwW%2BvzqZma2hiZ3xxfo6wn5qsXZ7AbsDHnmSsrJGjsaK%2Bw2aampqZo7K1ec%2Buo6Vlo57HpnrHraSl